Request for setting specific quantity steps on product page

  • This topic has 5 replies, 3 voices, and was last updated 3 years ago by Furkan Can Caymaz.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 6, 2021 at 1:28 pm #104763
    Furkan Can Caymaz
    Participant

    Hello,

    I just want the step quantity allowed.

    For example for the Product has the quantity step 1,44

    Then i just want the 1,44 allowed.

    NO 1, 1.21, 2.13 or for example 312.21

    only 1,44 – 2,88, … is allowed and it should round up

    First load it should round up too. Currently there is a “1” which is not allowed!

    Please Help

    July 6, 2021 at 1:33 pm #104764
    Furkan Can Caymaz
    Participant

    I have the Pro version

    July 6, 2021 at 7:45 pm #104765
    WPWhale
    Moderator

    Hi,

    Just set the minimum to 1.44 and from General >> Force options >> Reset to minimum quantity.

    This will make the product page loads with min (which is 1.44) then increases with 1.44 only.

    Omar

    July 7, 2021 at 12:12 pm #104766
    Furkan Can Caymaz
    Guest

    Hello Omar,

    Thanks for you response and your help.

    I tried that, it didint work. The default value is still “1” :/

    I still go to the product, it starts with an 1, and not 1.44 – Than if i go up, it jumps to 2.44, which is an invalid number. I just want all numbers, that can divided with the 1.44 with 0 (without remaining) – For example:  1.44;  2.88 ; 4,32 ; 5,76 ; …

    I just want allowed going in steps. (Example 1.44) No 3, or 4 – only 2.88 and 4.32

    I hope i could explain that

    Important:  The Number ” 1.44 ” is not the absolute general number for all products. This number is defined for each product individuall. One product could have the number “1.32”, the other could have the number “1.95”.  — The Number is defined foe every product seperatly.

    I bought the Pro version

    Please help and THANK YOU A LOT FOR YOUR HELP!!!

    Furkan Can Caymaz

    July 7, 2021 at 7:48 pm #104767
    WPWhale
    Moderator

    Hi Furkan,

    No worries at all, it’s probably a setting issue, can you please send us wp-admin access to [email protected] and we will be glad to set it up correctly for you?

    Omar

    July 7, 2021 at 10:10 pm #104768
    Furkan Can Caymaz
    Guest

    Thank you Omar so much.

    Great 10 / 10 Supoort!

    I invited you to the Website

    Furkan Can Caymaz

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.